Sintered Bronze Bearing Ball 2 Bolt Offset Flange Mounted Bearing, 16 Gauge - 10 mm
with SAE30 Non-Detergent Oil, Center to Center 1.5", Overall Length 3.735", Bearing Width 0.5", Spherical Diameter 1.002" Bolt Holes Mount Method
- Triangle Series
- CD
- Type
- Offset Flange Mounted Bearing
- Shaft Size (Bore ID)
- 10 mm
- Inside Diameter Lower Tolerance
- 10.016 mm
- Inside Diameter Upper Tolerance
- 10.043 mm
- Bearing Insert Type
- Bearing Ball without Bushing
- Bearing Ball Material
- Sintered Bronze
- Bearing Spherical Diameter
- 1.002"
- Other Lubrication Apparatus Options Available
- Yes
- Type of Lubricant
- SAE30 Non-Detergent Oil
- Bearing Width
- 0.5"
- Number of Mount Holes
- 2
- Mount Method
- Bolt Holes
- Mount Material
- Steel
- Mount Material Gauge
- 16 Gauge
- Overall Length
- 3.735"
- Mount Hole Center to Center
- 1.5"
- Mount Hole Shape
- Round
- Mount Socket Diameter
- 1"
- Finish
- Pre-Plated Hot Dipped Galvanized Steel
- Other Mount Finish available
- No
- Tapped Hole Available
- No
- Bearing Fit Options Available
- No
16-Gauge 10-MM Sintered Bronze 2-Bolt Offset Flange Mounted Bearing
Used with medium- or light-duty connecting rods or cranks, Triangle's long-lasting, inexpensive sintered bronze mounted offset flange bearings work well for a wide variety of applicatoins. For questions about your specific application requirements, contact us with our contact form.
| Triangle Series: | CD |
| Type: | Offset Flange Mounted Bearing |
| Shaft Size (Bore ID): | 10 mm |
| Inside Diameter Lower Tolerance: | 10.016 mm |
| Inside Diameter Upper Tolerance: | 10.043 mm |
| Bearing Insert Type: | Bearing Ball without Bushing |
| Bushing Material: | Sintered Bronze |
| Bearing Ball Material: | Sintered Bronze |
| Bearing Spherical Diameter: | 1.002" |
| Type of Lubricant: | SAE30 Non-Detergent Oil |
| Bearing Width: | 0.5" |
| Number of Mount Holes: | 2 |
| Mount Material: | Steel |
| Overall Length: | 3.735" |
| Mount Hole Center to Center: | 1.5" |
| Mount Socket Diameter: | 1" |
| Other Lubrication Apparatus Options Available: | Yes |
| Mount Method: | Bolt Holes |
| Mount Material Gauge: | 16 Gauge |
| Mount Hole Center to Center Type: | Imperial |
| Mount Hole Shape: | Round |
| Finish: | Pre-Plated Hot Dipped Galvanized Steel |
| Other Mount Finish available: | No |
| Tapped Hole Available: | No |
| Bearing Fit Options Available: | No |
| Min. Quantity for RFQ: | 1000 |
| With Cushion: | No |
| Bearing Mount Type With Bearing: | No |
16-Gauge 10-MM Sintered Bronze 2-Bolt Offset Flange Mounted Bearing
Used with medium- or light-duty connecting rods or cranks, Triangle's long-lasting, inexpensive sintered bronze mounted offset flange bearings work well for a wide variety of applicatoins. For questions about your specific application requirements, contact us with our contact form.
Value proposition CD: Offset Flange Mounted Bearing
Our offset flange mounted bearing mounts are stamped from 16-gauge galvanized steel. Available with a bronze, iron or nylon bearing, their shaft sizes range from 1/4" to 3/4". These strong, long-lasting, inexpensive mountings are used with medium or light duty connecting rods or cranks. Modifications can be made to the component to "capture" a bolt or nut. Custom options are available in large quantities.
